| Moment of inertia rotary group | 71924 ACB/HCP4AL |
| Maximum rotational speed | 165x120x22 |
| Flow | 165 |
| Rate Of Pressure Change | 120 |
| Control Fluid Drain | 22 |
| Drive Power | 120 mm |
| Voltage | 165 mm |
| Maximum Permissible Pilot Pressure | 22 mm |
| Displacement, geometric, per revolution | 136.92 mm |
| Maximum angular acceleration | 135 mm |
| Maximum Torque | 151.9 mm |
| Case volume | 2.2 mm |
| Sequence Valve | 11.9 mm |
| Drive Speed | 4.5 mm |
| Maximum Volume Flow | 2.9 mm |
| Power | 1.1 mm |
| Nominal Resistance | 0.6 mm |
| Rotary stiffness | 49.2 mm |
| Weight (approx.) | 126 mm |
| Pressurefree Operation | 126 mm |
| Pilot Pressure | 159 mm |
| Control Pressure Measurement | 161.8 mm |
| Load Pressure | 1 mm |
| Maximum Permissible Speed (limit Speed) | 0.6 mm |
| Torque | 138.2 mm |
| Maximum Axial Force At Standstill | 25.5 kN |
| Determining Operating Characteristics | 28.5 kN |
| Fatigue load limit - Pu | 1 kN |
| Limiting speed for grease lubrication | 11000 r/min |
| Limiting speed for oil lubrication | 17000 mm/min |
| Ball - Dw | 8.731 mm |
| Ball - z | 41 |
| Gref | 14.01 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 155 N |
| Preload class B - GB | 310 N |
| Preload class C - GC | 930 N |
| Calculation factor - f | 1.13 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.02 |
| Calculation factor - f2C | 1.08 |
| Calculation factor - fHC | 1.01 |
| Preload class A | 210 N/micron |
| Preload class B | 271 N/micron |
| Preload class C | 411 N/micron |
| d1 | 136.92 mm |
| d2 | 135 mm |
| D2 | 151.9 mm |
| C1 | 11.9 mm |
| C2 | 4.5 mm |
| C3 | 2.9 mm |
| r1,2 min. | 1.1 mm |
| r3,4 min. | 0.6 mm |
| da min. | 126 mm |
| db min. | 126 mm |
| Da max. | 159 mm |
| Db max. | 161.8 mm |
| ra max. | 1 mm |
| rb max. | 0.6 mm |
| dn | 138.2 mm |
| Basic dynamic load rating C | 33.8 kN |
| Basic static load rating C0 | 45 kN |
| Fatigue load limit Pu | 1.02 kN |
| Attainable speed for grease lubrication | 11000 r/min |
| Attainable speed for oil-air lubrication | 17000 r/min |
| Ball diameter Dw | 8.731 mm |
| Number of balls z | 41 |
| Reference grease quantity Gref | 14.01 cm³ |
| Preload class A GA | 155 N |
| Static axial stiffness, preload class A | 210 N/µm |
| Preload class B GB | 310 N |
| Static axial stiffness, preload class B | 271 N/µm |
| Preload class C GC | 930 N |
| Static axial stiffness, preload class C | 411 N/µm |
| Calculation factor f | 1.13 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.02 |
| Calculation factor f2C | 1.08 |
| Calculation factor fHC | 1.01 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 1.2 kg |
