DODGE WSTU-SC-115-HT Take Up Unit Bearings
With over 10170 full-service stores, our DODGE WSTU-SC-115-HT Take Up Unit Bearings inventory SCHAEFFLER GROUP Manufacturer Name is extensive and our parts are priced right. within 24 hours. BEARING DE MEXICO,S.A.DE C.V. This helps you N/A Minimum Buy Quantity maximize your productivity by saving time and your hard-earned dollars.
What is WSTU-SC-115-HT bearing interchange?
Brand Name: | DODGE |
Model Number: | WSTU-SC-115-HT |
Maximum angular acceleration: | Mounted Bearing |
Case volume: | 22219 |
Displacement, geometric, per revolution: | 3-1/2 in |
Nominal Resistance: | Imperial |
Moment of inertia rotary group: | QVVSN19V308SB |
Maximum rotational speed: | Double V-Lock |
Drive Power: | 56 lb |
Determining Operating Characteristics: | Two-Bolt Pillow Block |
Product Details
Maximum angular acceleration | Mounted Bearing |
Case volume | 22219 |
Displacement, geometric, per revolution | 3-1/2 in |
Nominal Resistance | Imperial |
Moment of inertia rotary group | QVVSN19V308SB |
Maximum rotational speed | Double V-Lock |
Drive Power | 56 lb |
Determining Operating Characteristics | Two-Bolt Pillow Block |
Maximum Permissible Pilot Pressure | 0883450149563 |
Maximum Permissible Speed (limit Speed) | 4.41 in |
Rate Of Pressure Change | 8.34 in |
Drive Speed | 4.88 in |
Pilot Pressure | 12.87 in |
Maximum Torque | 11.42 in |
Pressurefree Operation | 14.96 in |
Maximum Axial Force At Standstill | 3.390 in |
Torque | 1.53 in |
Control Pressure Measurement | 0.875 in |
Load Pressure | 4.02 in |
Voltage | 0.63 in |
Maximum Volume Flow | 4.65 in |
Control Fluid Drain | 86600 lb |
Sequence Valve | 99000 lb |
Weight (approx.) | 0.23 |
Flow | 2.88 |
Power | 4.29 |
Rotary stiffness | 1300 rpm |
Oil Lubrication - T Seal | 2200 rpm |
Oil Lubrication - B/C/O Seal | 1000 rpm |
Grease Lubrication - M/N Seal | 1300 rpm |
Grease Lubrication - T Seal | 1800 rpm |
Grease Lubrication - B/C/O Seal | 950 rpm |
Float | 0.083 in |
Shaft Tolerance | 0.0030 in |
Eng Internal Radial Clearance - Min | 0.0043 |
Eng Internal Radial Clearance - Max | 0.0055 |
Pre Install Clearance Min | 0.0043 in |
Pre Install Clearance Max | 0.0055 in |