3.188 Inch | 80.975 Millimeter x 4.375 Inch | 111.13 Millimeter x 3.75 Inch | 95.25 Millimeter LINK BELT EPB22451FH Pillow Block Bearings
3.188 Inch | 80.975 Millimeter x 4.375 Inch | 111.13 Millimeter x 3.75 Inch | 95.25 Millimeter LINK BELT EPB22451FH Pillow Block Bearings manufacturer and 61.000 mm Da - Outer Ring Backing Diameter global supplier of reliable ball and roller ... 3.188 Inch | 80.975 Millimeter x 4.375 Inch | 111.13 Millimeter x 3.75 Inch | 95.25 Millimeter LINK BELT EPB22451FH Pillow Block Bearings Industries Products Manufacturing 1.0 mm r - Outer Ring To Clear Radius3 & Engineering and Agricultural 3.188 Inch | 80.975 Millimeter x 4.375 Inch | 111.13 Millimeter x 3.75 Inch | 95.25 Millimeter Bearings designed to meet the BEARING DE MEXICO,S.A.DE C.V. unique requirements of our targeted industries.
What is EPB22451FH bearing interchange?
Brand Name: |
LINK BELT |
Model Number: |
EPB22451FH |
Control Fluid Drain: |
43000 |
Maximum Permissible Pilot Pressure: |
43112 |
Torque: |
43315 |
Power: |
Imperial |
Maximum rotational speed: |
0.70 Kg |
Maximum angular acceleration: |
Stamped Steel |
Maximum Torque: |
28.575 mm |
Drive Speed: |
80.167 mm |
Product Details
Control Fluid Drain |
43000 |
Maximum Permissible Pilot Pressure |
43112 |
Torque |
43315 |
Power |
Imperial |
Maximum rotational speed |
0.70 Kg |
Maximum angular acceleration |
Stamped Steel |
Maximum Torque |
28.575 mm |
Drive Speed |
80.167 mm |
Pressurefree Operation |
24.074 mm |
Maximum Axial Force At Standstill |
23.813 mm |
Determining Operating Characteristics |
26.988 mm |
Load Pressure |
0.760 mm |
Nominal Resistance |
2.29 mm |
Sequence Valve |
41.40 mm |
Maximum Volume Flow |
42.42 mm |
Weight (approx.) |
77.72 mm |
Moment of inertia rotary group |
67.06 mm |
Drive Power |
3.3 mm |
Displacement, geometric, per revolution |
2.5 mm |
Flow |
-2 mm |
Rate Of Pressure Change |
5360 lbf |
Case volume |
20700 lbf |
Rotary stiffness |
17100 lbf |
Pilot Pressure |
6130 lbf |
Maximum Permissible Speed (limit Speed) |
0.87 |
Voltage |
0.67 |
Control Pressure Measurement |
0.9 |
G1 - Heat Generation Factor (Roller-Raceway) |
16.8 |
G2 - Heat Generation Factor (Rib-Roller End) |
7.6 |
Cg - Geometry Factor |
0.0774 |