DODGE WSTU-SC-115-HT Take Up Unit Bearings
With over 10170 full-service stores, our DODGE WSTU-SC-115-HT Take Up Unit Bearings inventory SCHAEFFLER GROUP Manufacturer Name is extensive and our parts are priced right. within 24 hours. BEARING DE MEXICO,S.A.DE C.V. This helps you N/A Minimum Buy Quantity maximize your productivity by saving time and your hard-earned dollars.
What is WSTU-SC-115-HT bearing interchange?
Brand Name: |
DODGE |
Model Number: |
WSTU-SC-115-HT |
Maximum angular acceleration: |
Mounted Bearing |
Case volume: |
22219 |
Displacement, geometric, per revolution: |
3-1/2 in |
Nominal Resistance: |
Imperial |
Moment of inertia rotary group: |
QVVSN19V308SB |
Maximum rotational speed: |
Double V-Lock |
Drive Power: |
56 lb |
Determining Operating Characteristics: |
Two-Bolt Pillow Block |
Product Details
Maximum angular acceleration |
Mounted Bearing |
Case volume |
22219 |
Displacement, geometric, per revolution |
3-1/2 in |
Nominal Resistance |
Imperial |
Moment of inertia rotary group |
QVVSN19V308SB |
Maximum rotational speed |
Double V-Lock |
Drive Power |
56 lb |
Determining Operating Characteristics |
Two-Bolt Pillow Block |
Maximum Permissible Pilot Pressure |
0883450149563 |
Maximum Permissible Speed (limit Speed) |
4.41 in |
Rate Of Pressure Change |
8.34 in |
Drive Speed |
4.88 in |
Pilot Pressure |
12.87 in |
Maximum Torque |
11.42 in |
Pressurefree Operation |
14.96 in |
Maximum Axial Force At Standstill |
3.390 in |
Torque |
1.53 in |
Control Pressure Measurement |
0.875 in |
Load Pressure |
4.02 in |
Voltage |
0.63 in |
Maximum Volume Flow |
4.65 in |
Control Fluid Drain |
86600 lb |
Sequence Valve |
99000 lb |
Weight (approx.) |
0.23 |
Flow |
2.88 |
Power |
4.29 |
Rotary stiffness |
1300 rpm |
Oil Lubrication - T Seal |
2200 rpm |
Oil Lubrication - B/C/O Seal |
1000 rpm |
Grease Lubrication - M/N Seal |
1300 rpm |
Grease Lubrication - T Seal |
1800 rpm |
Grease Lubrication - B/C/O Seal |
950 rpm |
Float |
0.083 in |
Shaft Tolerance |
0.0030 in |
Eng Internal Radial Clearance - Min |
0.0043 |
Eng Internal Radial Clearance - Max |
0.0055 |
Pre Install Clearance Min |
0.0043 in |
Pre Install Clearance Max |
0.0055 in |